You can line your envelopes with the designer series paper of your choice with this free tutorial using the Stampin' Up! envelope punch board.
First, use the measurements on the bottom of the envelope punch board to make the envelope in the size that you want. Then measure the distance from the top of the flap to the side of the envelope as shown. Cut a square that is the size of that measurement. Use the envelope punch board to punch a notch on opposite corners. Score on the diagonal to match the envelope. Adhere the liner to the envelope flap. Onlu use adhesive above the score line. Leaving the bottom of the liner free allows the movement you need when you open and close the envelope.
For the sample shown in the photo, I made an A2 envelope starting with a rectangle that was 8 1/8 x 8 1/8. The measurement from the top of the flap to the side of the envelope was slightly more than 4 inches. I decided to make the liner out of a 4 inch square. That allowed me to get 9 squares out of a piece of 12 x 12 designer series paper.
p.s. Here is my video tutorial that I posted on 3/29. I used an 8 x 8 square of paper for the sample in the video.
Enjoy making your lined envelopes using Stampin' Up!'s envelope punch board.
Visit my online store to get your supplies for this project. Remember that when you purchase $25 or more in product, you are eligible for my Rewards Program.
Creatively yours,
Sharon Cheng
Richland Hills, TX
My Online Store
1 comment:
Thanks so Much for sharing this tutorial. Janet Mills NZ Demo.
Post a Comment